Product Details:
Usage | Digita Rotary Viscometer |
Display | Digital Display |
Power | Electronic |
Cup volume | 20 ml |
Additional Information:
Our second generation of Thermo Viscometer is designed for direct viscosity results without plotting of graph or use of software. It gives an instant and in-depth analysis of viscosity measurements by using advanced automation tools to directly calculate the viscosity and other parameters. It is a sturdy design which can withstand day to day industrial use in the field of printing inks, resins and allied coatings manufacturing. It features a very simple method of calibration.
Features:
Product Details:
Additional Information:
Product Details:
Design Meets | ASTM D4040 |
Viscosity Range | 10 - 1000 Poise |
Time Least Count | 0.01 Seconds |
Chrono Thermo Viscometer used to measure the viscosity of range of fluids from liquid to viscous materials. A sturdy instrument suitable for day to day industrial usage. A very popular instrument used in the field of Printing inks manufacturing. This instrument measures the viscosity by Laray method, wherein the time taken is recorded for the sample under test to travel a fix distance under different stress condition and these time results are further converted using various calculation method to Viscosity results. The Viscosity results are achieved either by Lloyds Viscosoft Software® or by graphical method using predrawn results on the graph sheet. Featuring advanced microprocessor based electronic with infrared control. Lloyds Laray Viscometer provides the highest accuracy and efficiency for research and development, quality control and process evaluation. A most important instrument used in the manufacturing of high quality printing inks and varnishes to control viscosity and yield values at various stages of production, and accurate quality control of production batches without any chances of rejection or reworking.
Features:
Accessories:
Additional Information:
Product Details:
Design Meets | ASTM D4040 |
Viscosity Range from | 10 - 1000 poise |
Time Least Count | 0.01 seconds |
Item Code | 92N |
Product Details:
Output Voltage Range | Upto 500 kV |
Power | Electronic |
Usage | Paper Testing Instrument |
Product Details:
Maximum Cutting Speed | 50 - 100mm/second |
Voltage | 220 - 380V |
Power | 20 kW |
The "Flexo-Proofer" provides an inexpensive and rapid means of proofing and matching ink colors - accurately simulating the results which would be obtained on a full scale Flexo- printing press.
Additional Information:
Product Details:
Test Weights | 2 LBS and 4 LBS |
Test Speed | (ASTM) 21/42/85/105 Rubs/min & (BS) 47 Rubs/min |
Cutting Templates Size | 152 x 51 mm |
Base Size | 152 x 76 mm |
Lloyds laboratory Rub Resistance Tester is a tool for comparing the rubbing, scuffing and marking of inks and coatings on commercial print and packaging. It can be used as a part of quality control in a production environment or an aid to development in the laboratory. Modern papers and carton boards can prove a challenge for inks and coatings. Harsh substrates such as matt paper and recycled board are prone to marking, scuffing and rubbing during post print production and transportation.The Ink Rub Resistance Tester is designed to determine the quality of adhesion, and scuff resistance of ink to paper surfaces, plastic and aluminium film. The motorised unit is simple to operate by entering the number of rubs in the preset counter and starting the unit. It will rub the sample until the pre-set value is achieved. Dry and Wet rub can be performed on the Ink Rub Resistance Tester. The method of operation is that a 2 or 4 Lb weight with a clean white board is swept across the test piece for a set number of times, then closely examined. The washability and resistance to fat, oils and detergents of inks and coatings can also be tested. This tester allows the user to visually compare the performance of different batches of production, ink/varnish formulations or substrates under the same abrasive conditions.
Standards:
Features:
Application:
Additional Information:
Product Details:
Test Speed | 60 RPM |
Power | 230 V 50/60 Hz |
Weights | 0.5, 1.0, 2.0 (PSI Test) |
Lloyds Laboratory Rub Resistance Tester is a tool for comparing the rubbing, scuffing and marking of inks and coatings on commercial print and packaging, it can be used as part of quality control in a production environment or an aid to development in the laboratory. Modern papers and carton boards can prove a challenge for inks and coatings. Harsh substrates such as matt paper and recycled board are prone to marking, scuffing and rubbing during post print production and transportation. The Rub Tester allows the user to compare the durability of printed cartons, commercial print or proofs of ink and varnish on a wide range of substrates. The tester uses a rotary motion to abrade the printed surface against virgin material, face to face against itself or to a reference material. The user can vary the abrasion force or number of cycles to adjust the severity of the test. The washability and resistance to fat, oils and detergents of inks and coatings can also be tested. This tester allows the user to visually compare the performance of different batches of production, ink/varnish formulations or substrates under the same abrasive conditions
Standards:
Features:
Application:
Additional Information:
Product Details:
Printing Width | 50 mm |
Printing Length | 150 mm |
Printing Force | FIX 600 N |
Additional Information: